Cook's Go-To Tackle Storage System is a revolutionary new system that converts the dead space under the deck compartment
lids of your boat into highly usable, exceptionally convenient storage space. These unique, new organizers
are perfect for storing spinner baits and well as a multitude of packaged baits. When your deck lids are open, baits
stored in the organizers may be easily taken in and out, however, when the lids are closed, all baits are securely locked
into place keeping them tangle free, even in rough water. The diagrams below better illustrate how
Cook's Go-To Tackle Storage System works.
Most users can use this installation method
INSTALLATION INSTRUCTIONS -- NO DRILLING REQUIRED*
FOR BOATS WITH SMOOTH FIBERGLASS UNDER THE LIDS such as Ranger, BOATS
WITH EXPOSED METAL CHANNEL UNDER THE LIDS such as Triton, and BOATS WITH
SMOOTH METAL UNDERSIDES OF LIDS such as Rebel you can use 3m double
sided tape (3m brand Scotch exterior mounting tape #4011T)...red label (not included with package). Clean both surfaces
with alcohol, apply tape to the Cook's Tackle System, then to your
mounting surface This method is not recommended for underside with
carpet or foam padding.
|
INSTALLATION INSTRUCTIONS -- Pro's Soft Bait Glue*
For those of you who prefer not to drill into your boats, Pro's Soft
Bait Glue, a great product for your soft plastic baits, is also a quick
and easy way to mount your Cook's GO-TO Tackle Storage System. This glue may be purchased from
www.prosoftbaitglue.com/. See installation instructions.
Mounting instructions for using the Pro's Soft Bait Glue:
- Lightly sand mounting area, clean with alcohol.
- Lightly sand mounting surface of Cook's GO-TO Tackle Storage System.
- Be sure you have clearance for racks and baits.
- Be sure you have the Cook's GO-TO Tackle Storage System where you want it--once in place, it cannot be moved.
- "Lightly" apply the Pro's Soft Bait Glue onto the Cook's
- GO-TO Tackle Storage System and mount to surface.
* Pro's Soft Bait Glue Sold Separately.
|
(Mounting Hardware Included)
Alternate Installation Method
(Mounting Hardware Included)
|
NOTE:* It has been brought to our attention that many people really like
our Tackle Storage System, but when it comes to drilling the 11/64"
diameter holes, and installing the two #6 screws they are very concerned
that the screw heads will be visible. We intentionally downsized the
mounting screws to a #6 screw so the head would be small & disappear in
the carpet when tightened. If the instructions on the package card are
followed this will not be a problem. Pick the carpet fibers out from
under the screw head prior to tightening the screws, then as the screws
are tightened the rubber backing of the carpet will yield and the fibers
will pull over the screw heads concealing them very well. This rubber
backing will also seal the screw from any leakage from rain.
|
